CONTACT US
HOME > PRODUCT INFORMATION／INDUSTRIAL HOSE > ABRASIONｰRESISTANT
 |
 |
 |
 |
 |
 |
 |
 |
- Abrasion resistance four times as much as TOTAKU HERAN-N.
※Comparison made in respect of a worn volume during 8 hours from the start of test. - Translucent wall enables visual check of the material flow and easy detection of a clogged portion.
- Light weight and flexible.
- Pressure-resistant performance against maximum allowable pressure of 0.5MPa1(5.1kgf/cm2).
- With reinforcing fiber, this hose is quite durable and most suitable for using at the uneven place where the hose is subject to elongation load.
- Embedded grounding wire gives an excellent anti-static effect.
- For transportation of slaked lime and activated carbon at garbage incineration plant.
(Specially, recommendable for using at a place where small bending radius is required.) - For suction of earth and sand in the “shield” construction method.
- For suction and conveyance of crushed stone and ore.
- Hose of damper exclusive use.
- ※Not recommendable for transportation of the fluid where the oil content is included.
| Fluid | Water・hot water、Powder・granule |
|---|---|
| Material | other (polyurethane resin) |
| Temperature | -10 ～ 50 |
| Function | ･Abrasion resistant ･High anti-statics performance (with a ground wire) ･Pressure resistance 0.5MPa （5.1kgf/㎠） ･Having transparency |
| Nominal diameter |
Inside Diameter mm |
Outside Diameter mm |
Pitch mm |
Weight (reference) g/m |
L/coil m |
Allowable pressure (at room temperature) MPa{kgf/cm2｝ |
Allowable bending radius mm |
|---|---|---|---|---|---|---|---|
| 100｛4｝ | 101.6 | 121.8 | 16.4 | 3240 | 20 | 0.50｛5.1｝ | 360 |
| 125｛5｝ | 125.9 | 152.2 | 22.0 | 4530 | 20 | 540 | |
| 150｛6｝ | 152.4 | 182.4 | 26.0 | 6110 | 20 | 900 | |
| 200｛8｝ | 203.7 | 240.5 | 28.0 | 8380 | 10 | 1050 |
| Nipple for hoses |
|---|
| Bands & Swaging |
