CONTACT US
HOME > PRODUCT INFORMATION／INDUSTRIAL HOSE > FLUORO
 |
 |
 |
 |
 |
 |
 |
 |
-
TOTAKU FLUORO-A
-
TOTAKU FLUORO-A
with a ground wire
Caution) This hose
will be built-to-order
- Excellent medical durability
- Conformed to Notification of Ministry of Health, Labour and Welfare No.201 & No.267
- Thanks to water-repellent inner surface, easy to wash
- It’s safe and easy for connecting to equipments (when using SHIMETAC for TOTAKU FLUORO)
- Thanks to all plastics structure,it’s light weight
- Feature of fluorine hose (fluororesin layer is adopted to inner surface of the hose)
- Thanks to the tetrafluoride resin, chemical reaction causes hardly and excellent in chemical resistance
- Thanks to excellent water-repellence, easy to clean
- Elution resistance enables restraining deterioration and conforms to Notification of Ministry of Health, Labour and Welfare
- For suction and delivery
- For transportation of chemicals
- For transportation of foodstuffs
■Cautions - Not suitable for medical and medicinal use.
- It cannot be guarantee in the use of that.
Not suitable for powder and granule.
| Fluid | Water・hot water、Solvent, paint、Food、Chemical (including pure water）、Oils |
|---|---|
| Material | fluorin resin (inside), PVC (outside) |
| Temperature | -10～50 |
| Function | ・Conforms to Ministry of Health,Labour and Welfare Notifications
・Nonadhesive ・Having transparency ・Excellent medical durability ・Low odor |
| TOTAKU FLUORO-A TOTAKU FLUORO-A with a ground wire | Shown in parentheses are TOTAKU FLUORO-A with a ground wire. /Flexible due to corrugated outer surface (inner surface is flat and smooth) |
| Nominal diameter | Inside Diameter mm |
Outside Diameter mm |
Pitch mm |
Weight (reference) g/m |
L/coil m |
Allowable pressure (at room temperature) MPa{kgf/cm2｝ |
Allowable bending radius mm |
|---|---|---|---|---|---|---|---|
| 50{2} | 50.8 | 60.6 | 10 | 809(833) | 10 | 0.25｛2.5｝ | 300 |
-
TOTAKU FLUORO-C
-
TOTAKU FLUORO-C with a ground wire
Caution) This hose
will be built-to-order
| TOTAKU FLUORO-A TOTAKU FLUORO-A with a ground wire | Shown in parentheses are TOTAKU FLUORO-A with a ground wire. /Thanks to flat surface, easy to keep cleanness |
| Nominal diameter | Inside Diameter mm |
Outside Diameter mm |
Weight (reference) g/m |
L/coil m |
Allowable pressure (at room temperature) MPa{kgf/cm2｝ |
Allowable bending radius mm |
|---|---|---|---|---|---|---|
| 25{1} | 25.4 | 32.2 | 420(437) | 10 | 0.5｛5.1｝ | 240 |
| 38{1 1/2} | 38.0 | 46.2 | 725(744) | 10 | 0.4｛4.1｝ | 350 |
※1．Conditions of Hot Water Washing: Temperature: 80℃ or less, Pressure: 0.1MPa or less, Pressurization time: up to 30 minutes.
※2．TOTAKU FLUORO should need the original fitting and nipple. “Notification of Ministry of Health, Labour and Welfare No.267”
※Please inquire to us about nipples except of the above.
| Nominal diameter |
T | W | H | Bolt size |
|---|---|---|---|---|
| 25 | 81 | 50 | 46 | M8 |
| 38 | 97 | 60 | 61 | M8 |
| 50 | 108 | 65 | 75 | M8 |
(Unit:mm)
| Pressure resistance performance: | The special stopper device structure further improves pressure resistance performance |
|---|---|
| Materials: | The holder is made of SCS14 (equivalent to SUS316), the bolt and nut is made of SUS304, the packing is made of silicon. |
| Bolt: | The top of hexagon hole enables easy and reliable tightening |
| Working property: | Easy to connect on the job site |
|---|---|
| Economy: | Can use repetitively |
| Water collecting: | The new shape of the nipple end avoids the collecting water on the inside of the hose’s wall. |
※ Please make sure to use the original nipple for SHIMETAC. For details, please inquire to us.
| Nipple for hoses |
|---|
| Bands & Swaging |
