CONTACT US
TOTAKU DUCT-EE
Example of caffs inatallation
(It doesn't keep completely airtight and watertight）
- Spread type of TOTAKU DUCT-D.
- There is little internal resistance compared with TOTAKU DUCT-D, and good transportation ability is obtained.
- Lightness and Flexibility enable labor-saving.
- Easy to cut and install, easy connection
- For indoor ducting and blowers.
- For ducting and blowers for factory equipment.
- Additionally, for dust collection and air supplying exhaust.
| Fluid | Water・hot water、Air (blower) |
|---|---|
| Material | PVC |
| Temperature | -10 ～ 50 |
| Function | ･Duct (blower) |
| Nominal diameter |
Inside Diameter mm |
Outside Diameter mm |
Pitch mm |
Weight (reference) g/m |
L/coil m |
Allowable pressure (at room temperature) MPa{kgf/cm2｝ |
Allowable decompression
power （at room temperature） kPa{mmHg} |
Allowable bending radius mm |
|---|---|---|---|---|---|---|---|---|
| 32｛1¼｝ | 32.4 | 38.6 | 8.4 | 220 | 50 | 0.06｛0.6｝ | -66.0｛-495｝ | 32 |
| 38｛1½｝ | 37.3 | 44.5 | 9.2 | 295 | 38 | |||
| 50｛2｝ | 50.6 | 60.2 | 10.0 | 585 | 30 | 0.05｛0.5｝ | 50 | |
| 65｛2½｝ | 62.4 | 72.0 | 12.0 | 645 | 0.04｛0.4｝ | 65 | ||
| ※75｛3｝ | 76.4 | 86.4 | 13.0 | 775 | -33.0｛-248｝ | 75 | ||
| ※90｛3½｝ | 88.9 | 99.5 | 13.5 | 945 | 0.03｛0.3｝ | 90 | ||
| ※100｛4｝ | 101.6 | 112.2 | 15.0 | 1020 | -21.5｛-161｝ | 100 | ||
| ※115｛4½｝ | 114.3 | 125.9 | 17.4 | 1255 | 20 | -20.0｛-150｝ | 110 | |
| 125｛5｝ | 125.9 | 138.7 | 21.0 | 1350 | 0.02｛0.2｝ | 125 | ||
| 150｛6｝ | 152.4 | 164.8 | 20.0 | 1670 | -14.5｛-109｝ | 150 | ||
| ※165｛6½｝ | 165.0 | 177.8 | 22.0 | 1770 | -10.0｛-75｝ | 150 | ||
| 175｛7｝ | 177.8 | 190.6 | 20.0 | 1935 | 175 | |||
| 200｛8｝ | 203.7 | 217.1 | 22.5 | 2190 | 0.01｛0.1｝ | -6.0｛-45｝ | 200 | |
| 225｛9｝ | 227.0 | 240.4 | 23.5 | 2440 | 10 | -5.5｛-41｝ | 225 | |
| 250｛10｝ | 252.0 | 266.2 | 25.0 | 2950 | -4.5｛-34｝ | 250 | ||
| 275｛11｝ | 278.0 | 292.6 | 28.0 | 3150 | -4.0｛-30｝ | 275 | ||
| 300｛12｝ | 303.0 | 318.0 | 30.0 | 3480 | -3.0｛-23｝ | 300 |
Sizes marked ※ can be connected to steel pipes.
