PRODUCT INFORMATION

TOTAKU IT-13

  • Back
TOTAKU IT-13 (Free Installation) Picture
Features
Made of aluminum-polyester cloth and zinc -coated steel sheet, and is usable at the temperature of 130°C or less.
Specially laminated film is used, which reduces dusts being generated by surface friction.
Retractable, and easy storage and transportation.
Applications
For blowing and exhausting use, where smaller amount of dusts raising is required such as the clean-room.
For air-intake and exhaust of hot air generator.
Fluid Air (blower)
Material other (Aluminum-polyester cloth)
Temperature -20 ~ 130
Function ・Duct (blower)
・Heat resistant

STANDARD DIMENSIONS AND PROPERTIES

Nominal
diameter
Inside
Diameter
mm
Outside
Diameter
mm
Weight
(reference)
g/m
L/coil Allowable pressure
(at room temperature)
MPa{kgf/cm2
許容減圧力
(常温)
kPa{mmHg
Allowable
bending radius
mm
50{2} 51.0 54.5 365 5 0.007{0.07} -8.5 {-64} 120
65{2½} 67.5 71.5 445 -8.0 {-60} 140
75{3} 76.0 80.0 520 -7.0 {-53} 160
100{4} 102.5 106.0 630 -6.5 {-49} 210
125{5} 127.5 131.0 755 -6.5 {-49} 250
150{6} 152.0 155.0 925 -6.0 {-45} 300
175{7} 176.5 180.0 1050 -5.0 {-38} 300
200{8} 202.0 205.0 1225 -4.5 {-34} 400
250{10} 253.0 256.0 1550 -3.0 {-23} 600
300{12} 303.0 306.0 1840 -3.0 {-23} 600

 

To Product Index
  • PRODUCT INFORMATION