PRODUCT INFORMATION
HOME > PRODUCT INFORMATION/INDUSTRIAL HOSE > PRESSURE-RESISTANT & ABRASION-RESISTANT
  • PRESSURE-RESISTANT & ABRASION-RESISTANT
FLUORO ECO FOR FOODS DUCT SUCTION & DELIVERY POWDER & GRANULE PRESSURE-RESISTANT & ABRASION-RESISTANT ABRASIONーRESISTANT

LINE POWER-AT

  • UP
  • DOWN
LINE POWER-AT Picture
  • Structural drawing
  • Printing page

Example of coupling installation .1

 

Example of coupling installation .2

 

Example of coupling installation .3

Features
Max allowable pressure is 1.00MPa{10.2 kgf/㎠} (at room temperature), good pressure durability, and a structure of less elongation during pressuring
As the inside layer is of abrasion resistant rubber, abrasion resistance is good.
Strong resistance to outside pressure, with little deformation
Applications
For suction/delivery of muddy water for construction sites using the shield method of muddy water, the reverse method, etc.
For suction/delivery of muddy water at normal construction sites
For suction/delivery of sand, gravel, sludge, etc.
For dredging, filling-in
For suction/delivery of powder, pellets such as cement
For transportation of high-density material and for high-elevation delivery
※Please avoid the use and storage over the long period of time in the outdoors.
(There is fear of crack initiation by ozone degradation.)
Fluid Water・hot water、Powder・granule、mortar
Material rubber
Temperature -10 ~ 50
Function ・Pressure resistant 1.0MPa (10.2kgf/㎠)
・Abrasion resistant
・High anti-static performance (with no ground wire)

STANDARD DIMENSIONS AND PROPERTIES

Nominal
diameter
Inside
Diameter
mm
Outside
Diameter
mm
Pitch

mm
Weight
(reference)
g/m
L/coil

m
Allowable pressure
(at room temperature)
MPa{kgf/cm2
Allowable
bending radius
mm
50{2} 50.8 69.5 10.0 1725 20・50 1.00{10.2} 600
65{2½} 63.5 86.0 14.3 2270 750
75{3} 76.2 99.5 15.1 2790 750
100{4} 101.6 129.0 17.0 4400 1250
125{5} 127.0 159.5 22.0 6110 20 1700
150{6} 152.4 187.5 22.0 7740 2000
200{8} 203.2 247.5 25.0 13250 10 2250

●As for the maximum length of the hose, please consult us regarding possible special freight costs when placing an order.

 

To Product Index

Shime-TAC for LINE POWER-AT

  • UP
  • DOWN
Shime-TAC for LINE POWER-AT Picture
  • Printing page
Features
Allowable pressure of TOTAKU LINE POWER-AT with which SHIME-TOTAKU coupling is connected is equal to that of the hose only.
Attaching and detaching work of the couplings on the job site is easy.
(Note) Please use iron couplings only for SHIME-TOTAKU.

Sizes,Types
Nominal Dia. of 50, 65, 75, 100mm are available.
(Note)PT Nipple made of the resin is available only in sizes of 38 and 50mm.
S-Collar Nipple, M1 Nipple, Nipple with JIS10KF, Both Mouth Nipple
(made of iron or SUS) and Kamlok (made of SUS) are available.

Original nipples

鉄製ニップル・樹脂製ニップル

STANDARD DEMENSIONS & PROPERTIES

Nominal
diameter
T W H Bolt
size
50 113 63 79 M8
65 131 78 97 M8
75 153 90 112 M10
100 182 105 142 M10

(Unit:mm)

 

製品図
To Product Index

Table of combination for couplings and bands

Nipple for hoses
Bands & Swaging

 

To Product Index
  • PRODUCT INFORMATION