PRODUCT INFORMATION

TAC SD-AS

  • Back
TAC SD-AS

Example of coupling installation

特長
With special formulation of soft-PVC, the anti-static effect will last as shown in the under-mentioned table. (ref. Table 2)
Transparent wall (clear green) enables visual check of the material flow.
Applications
For transportation of plastic pellets, especially good for Nylon/ABS, etc which require pre-drying.
Additionally, for transportation of pellets/powder (except foodstuffs)
Fluid Water・hot water、Powder・granule
Material PVC
Temperature -10 ~ 50
Function ・High anti-static performance (with no ground wire)
・Having transparency ・With special formulation of soft-PVC, excellent in anti-static performance
・Highly flexible due to corrugated outer surface (inner surface is flat and smooth)

STANDARD DIMENSIONS AND PROPERTIES

Nominal
diameter
Inside
Diameter
mm
Outside
Diameter
mm
Pitch

mm
Weight
(reference)
g/m
L/coil

m
Allowable pressure
(at room temperature)
MPa{kgf/cm2
Allowable
bending radius
mm
25{1} 25.4 30.8 7.5 200 50 0.20{2.0} 70
32{1¼} 32.0 38.2 8.5 255 0.15{1.5} 80
38{1½} 38.0 44.6 9.0 385 90
50{2} 50.8 58.0 10.0 540 0.10{1.0} 150
65{2½} 63.5 73.0 14.3 810 20・50 180
※75{3} 76.2 87.5 15.1 1125 210
※100{4} 101.6 115.0 16.4 1965 300
125{5} 125.9 141.6 22.0 2520 20 350
150{6} 152.4 172.0 22.0 4530 0.15{1.5} 675
The size of the mark ※ can be directly connected with a steel pipe.

 

  • PRODUCT INFORMATION